Box Rib 1
play_circle_outlineVideo

Features

task_altNo-clip panel, or clip installation for expansion/contraction
task_altMultiple rib patterns provide a variety of looks and design options
task_altPanel depths of 1-3/8”
task_altCost-effective installation
task_altHorizontal or vertical installation
task_altPanel lengths: 30' maximum for steel
task_altPanel lengths: 22’ maximum for aluminum on the thru-fastened leg, longer lengths available on clip panels
play_circle_outlineVideo

Features

task_altNo-clip panel, or clip installation for expansion/contraction
task_altMultiple rib patterns provide a variety of looks and design options
task_altPanel depths of 1-3/8”
task_altCost-effective installation
task_altHorizontal or vertical installation
task_altPanel lengths: 30' maximum for steel
task_altPanel lengths: 22’ maximum for aluminum on the thru-fastened leg, longer lengths available on clip panels

Precision Series Box Rib architectural wall panels provide design flexibility by combining bold visual effects with easy, cost-effective installation. Multiple profiles are available with a variety of rib patterns. Each profile is offered in a no-clip panel, or a clip-fastened panel to accommodate expansion and contraction.

The Box Rib profiles are 1-3/8” deep and a nominal 12” wide. All precision Series profiles, including Box Rib, Highline and HWP, can be intermixed to add visual intensity to a building’s exterior. Precision Series wall panels can be installed horizontally or vertically. Consult Petersen rep for maximum length; minimum panel length is 4’.

Additionally, Precision Series wall panels can be specified as perforated but only in aluminum for use in equipment screen applications, over graphics or for architectural flair.

Box Rib panels should be installed in single-piece runs, either horizontally or vertically. For panels more than 20-ft. long, the clip version should be utilized. For panels less than 20-ft. long, the screw leg version is acceptable. For wall elevations with panels longer than 36-ft., flashing breaks must be used as indicated by the architect or designer. Box Rib panels are NOT designed to be field-lapped over one another.

Consult Petersen rep for maximum length; minimum panel length is 4-ft. Note: Minimum length for panels produced in the Annapolis Junction, Md., facility is 60 inches.

Box Rib 1
zoom_in
Precision Series - Clip Detail
Clip Detail
zoom_in
Precision Series - Nail Flange Detail
Fastener Flange Detail
zoom_in
layers43 stocked colors (24 gauge steel)
layers36 stocked colors (.032 aluminum)
layers16 stocked colors (22 gauge steel)
layers22 stocked colors (.040 aluminum)
layers29 stocked colors (.050 aluminum) (Clip version only)
layersGalvalume Plus available

Precision Series Box Rib architectural wall panels provide design flexibility by combining bold visual effects with easy, cost-effective installation. Multiple profiles are available with a variety of rib patterns. Each profile is offered in a no-clip panel, or a clip-fastened panel to accommodate expansion and contraction.

The Box Rib profiles are 1-3/8” deep and a nominal 12” wide. All precision Series profiles, including Box Rib, Highline and HWP, can be intermixed to add visual intensity to a building’s exterior. Precision Series wall panels can be installed horizontally or vertically. Consult Petersen rep for maximum length; minimum panel length is 4’.

Additionally, Precision Series wall panels can be specified as perforated but only in aluminum for use in equipment screen applications, over graphics or for architectural flair.

Box Rib panels should be installed in single-piece runs, either horizontally or vertically. For panels more than 20-ft. long, the clip version should be utilized. For panels less than 20-ft. long, the screw leg version is acceptable. For wall elevations with panels longer than 36-ft., flashing breaks must be used as indicated by the architect or designer. Box Rib panels are NOT designed to be field-lapped over one another.

Consult Petersen rep for maximum length; minimum panel length is 4-ft. Note: Minimum length for panels produced in the Annapolis Junction, Md., facility is 60 inches.

Box Rib 1
zoom_in
Precision Series - Clip Detail
Clip Detail
zoom_in
Precision Series - Nail Flange Detail
Fastener Flange Detail
zoom_in

layers43 stocked colors (24 gauge steel)
layers36 stocked colors (.032 aluminum)
layers16 stocked colors (22 gauge steel)
layers22 stocked colors (.040 aluminum)
layers29 stocked colors (.050 aluminum) (Clip version only)
layersGalvalume Plus available
close
close